ME910G1-WW LTE CatM1/NB2 Module

Product number
LTE CatM1/NB2 GNSS, Worldwide Coverage, 2G fallback

Variations of the ME910G1-WW LTE CatM1/NB2 Module

Log in to see possible volume discounts on this product.
Stock Status:Small quantities of these modules are in stock. Large quantities ship in 4-8 weeks.


Enabling a new generation of massive low-cost IoT device deployments numbering in the hundreds of thousands or millions, the ME910G1 is the Category M1/NB2 evolution of the brand new Telit xE910 product family. Exceeding market demands for optimized power consumption and enhanced quality of coverage, Cat M1/NB2 devices are specifically tailored for low data throughput IoT applications. This model further enriches the widely deployed Telit xE910 family of 28 x 28 mm LGA modules.

Key Features of the ME910G1

  • Design once and deploy globally with the xE910 form factory family
  • Ideal solution for global IoT applications such as smart metering, security & surveillance, point of sales, health monitoring, fleet management, asset tracking and wearable devices
  • Compliant to 3GPP Release 14 Cat M1/NB2, tailored for IoT device.

Product Features

  • LTE UE Category M1(1.4 MHz) / NB2 (200 KHz)
  • 3GPP release 14 compliant
  • Half Duplex FDD
  • Single Rx, single antenna
  • 3GPP Rel. 12 Power Saving Mode (PSM)
  • 3GPP Rel. 13 Extended Discontinuous Reception (eDRX)
  • 3GPP Rel. 13 Extended coverage
  • Control via AT commands according to 3GPP TS27.005, 27.007 and customized Telit AT commands
  • SIM application Tool Kit 3GPP TS 51.01
  • VoLTE (planned)
  • SMS over NAS
  • IPv4/IPv6 stack with TCP and UDP protocol
  • Embedded GNSS (GPS, GLONASS, Beidou, Galileo)
  • OMA Lightweight M2M (LWM2M)
  • Over-the-Air firmware update


LTE Category M1 (Rel.14)

  • Uplink up to 1Mbps
  • Downlink up to 588 Kbps

LTE Category NB2 (Rel.14)

  • Uplink up to 160 Kbps
  • Downlink up to 120 Kbps


  • Uplink up to 210 Kbps
  • Downlink up to 264 Kbps

Physical & Environment

  • Extended temperature range -40°C to +85°C


  • Dimensions: 28.2 x 28.2 x 2.2mm
  • 10 I/O ports maximum including multifunctional I/Os
  • 1.8V SIM Interface
  • USB 2.0 HS
  • UART
  • SPI
  • I2C

Electrical & Sensitivity

Supply voltage

  • Nominal: 3.8 VDC
No accessories information available
No industry information available
No case studies available