Calliope 2 GC02S1 EVK

What can you do with the Calliope 2 Cat 1bis EVK?

• Connect to a host PC (Windows / Linux) via USB cable
• Send AT commands to the module for control
• Attach to LTE live network or test equipment (CMW500 or similar)
• Send data over standard IP interface, through PPP or through AT commands
• Measure power consumption of the LTE sub-system

What comes with the Calliope 2 Cat 1bis EVK

• Evaluation kit based on Calliope 2 modules
• Pre-paid SIM card
• One MiniUSB cable, one USB Type C cable, embedded Ignion® antenna with antenna tuner
• User manual and USB Windows driver available for download

What can you do with the Calliope 2 Cat 1bis EVK?

• Connect to a host PC (Windows / Linux) via USB cable
• Send AT commands to the module for control
• Attach to LTE live network or test equipment (CMW500 or similar)
• Send data over standard IP interface, through PPP or through AT commands
• Measure power consumption of the LTE sub-system

Interfaces for the Calliope 2 Cat 1bis EVK

• USB Type C
• 4xUART over mini-USB
• UART direct access
• Removable SIM
• JTAG
• RF connector

Other Features of The Calliope 2 Cat 1bis EVK

• Soldering bridges to easily change pullup/ pull-down configuration
• Remote reset over USB
• Automatic switching when using external power supply

Software

• Field proven LTE software stack

Reference Design

• Schematics, BOM and layout of NEKTAR available as reference design

RF Frequency

• As per the embedded module

Operating Supply

• 5V when operated via USB
• 3.1V-5.5V when using external power supply
• UART/GPIO logic: 1.8V